2026年8月FDA食品接触物质清单（FCS）更新

FCN No

Notifier

Food contact substance

Intended use

Limitations/specifications

2509

ElringKlinger Kunststofftechnik GmbH

Poly(oxy-1,4-phenylenecarbonyl) (CAS Reg. No. 26099-71-8)

As an additive in polytetrafluoroethylene (PTFE) polymers intended for molded parts for sealing applications such as seals, gaskets, and O-rings, except for use in contact with infant formula and human milk (see Limitations/Specifications).

The FCS will be used at levels not to exceed 25 weight percent in PTFE polymers. The finished polymers produced using the FCS may be used in repeat-use molded parts for sealing applications used in food processing equipment such as seals, gaskets, and O-rings, intended to contact beverages.The FCS is not for use in contact with infant formula and human milk. Such uses were not included as part of the intended use of the substance in the FCN.

2512

Kelp Industries Ltd.

Agar palmitate (CAS Reg. No. 54991-18-3)

As a coating for paper and paperboard, except for use in contact with infant formula and human milk (see Limitations/Specifications).

Articles containing the FCS may contact all foods under Conditions of Use E through G, as described in Tables 1 and 2. The FCS is not for use in contact with infant formula and human milk. Such uses were not included as part of the intended use of the substance in the FCN.

2517

Buckman Laboratories, Inc.

2-Propenoic acid, 2-methyl, polymers with acrylamide, hydrolyzed poly(vinyl acetate) and 2-hydroxyethyl methacrylate (CAS Reg. No. 2349398-97-4)

For use as a creping agent in the manufacture of paper, except for use in contact with infant formula and human milk (see Limitations/Specifications)

The FCS may be used at levels not to exceed 25.4 μg/in2 of finished paper. The FCS may be used in contact with all food types under Conditions of Use A through H as described in Tables 1 and 2.The FCS is not for use in contact with infant formula and human milk. Such uses were not included as part of the intended use of the substance in the FCN

 2530

Toyobo Co., Ltd.

The FCS is a reaction product of three polymers:

2-Propenoic acid, 2-methyl-, methyl ester, polymer with 4,5-dihydro-2-(1- methylethenyl)oxazole and ethyl 2-propenoate (CAS Reg. No. 57460-65-8);

Methyl methacrylate, ethyl acrylate, methacrylic acid, butanoic acid 3-oxo-2-[(2-methyl-1-oxo-2-propenyl)oxy]ethyl ester, 3- (trimethoxysilyl)propyl methacrylate with poly(oxy-1,2-ethanediyl), alpha-sulfo-omega-[1- hydroxymethyl)-2-(2-propen-1-yloxy)ethoxy]-, C11-rich C10-14-branched alkyl ethers, ammonium salts copolymer (CAS Reg. No. 3088423-12-2); and

1,3-Benzenedicarboxylic acid, polymer with 2-[(2-aminoethyl)amino]ethanol, 1,3-bis(isocyanatomethyl)cyclohexane, decanedioic acid, 1,3-diisocyanatomethylbenzene, 2,2-dimethyl-1,3-propanediol, 1,2-ethanediol and 3- hydroxy-2-(hydroxymethyl)-2- methylpropanoic acid, compound with 1,1’,1’’-nitrilotris[2- propanol] (CAS Reg. No. 1239020-50-8).

As a coating on polyethylene terephthalate (PET) food packaging films, except for use in contact with infant formula and human milk (see Limitations/Specifications).

The minimum thickness of the coated film is 0.5 mil., or 11.5 μm. The FCS coating on the films will not exceed 37 nm. The films may be used in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2. The FCS is not for use in contact with infant formula and human milk. Such uses were not included as part of the intended use of the substance in the FCN.